MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop MOCpages Advice
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
Conversation »
Son of the Background for your MOC in Photoshop
Join to comment
 Group admin 
Okay,'s what I'd recommend for getting your own pic into the background...

CREATE A LAYER FOR YOUR MOC: Follow the instructions on my first tutorial until you have gotten to Stage Two, Step 1), to where the outline has disappeared.
Quoting Mark Kelso
1) Open Photoshop to full screen size.
2) Click File, then Open.
3) Select the picture you want to play around with and open it.
4) Enlarge the window with your MOC picture to it's fullest size.
5) Move the cursor to the Tool box (long vertical window over the on the left side), and select the Zoom tool.
6) Place the Zoom cursor over your image and zoom in to your picture so you can clearly see the edges of your MOC. (By the way, any time you want to zoom out, hold the Alt key while clicking on your image)
7) Go to the Tool box and select the Polygonal Lasso tool.
8) Place the Polygonal Lasso tool right on the edge of your MOC and click once (you'll see that it attaches itself and there will be a long, stretchy, line that extends from that point).
9) Continue clicking along the very edge of your MOC with the Lasso tool. (Any time you make a mistake, you can press your keyboard's delete button, and it will back up one step).
10) Once you've outlined your entire MOC, the line will flash (to let you know the outlined item has been selected). You can zoom back out now if you'd like.

Stage Two: Working in Layers - Here you'll create a Layer for your MOC and a separate layer for your background. Once this is done, you can adjust one (in all sorts of ways) without affecting the other.

1) Move the cursor to Edit, click on Copy, click Edit again, and click on paste. (The outline will have disappeared.)


1) Go to FILE, then OPEN, and select the image you want as a background.
2) A new window with the image should have opened. Go to SELECT, then click ALL.
3) Go to EDIT, then CUT. The image should have disappeared, and now you can close out that window. (It will probably ask if you want to save NO.)
4) Now go to EDIT again, then click PASTE.

At this point your new background (or at least a portion of it, depending on size) should appear in the window with your MOC. It will be an additional layer. If you go to the LAYERS tab and click on it, you should see a new layer has been added to the list.

5) Hit CTRL + T and an outline will appear around this new layer. You can now move it around (by dragging with the mouse), or re-size it.

If you want to re-size it, place the cursor RIGHT on the corner, hold down the SHIFT key (which will keep the proportions while resizing), and adjust the image.


1) Once you've got the background approximately the size and location you want it (you can always adjust it further by following the same steps above), go to the LAYERS tab and click on it.
2) Click on the Layer that has your background image (which will probably be called Layer 2)so that it's highlighted, and move it underneath the Layer 1 box by dragging it.

Side note: In the LAYERS drop down box, one of the Layers will be called "Background." The Background layer is the image you started with, and as long as it's called "Background," it will always be the very bottom layer. You can delete it if you want. Also, if you want to make it so the layer is movable, do the following: right-click it, select "Duplicate Layer," and click OK. This will make a copy version that is movable.


1) Last time I showed you how to soften the edges of your MOC with the BLUR tool. This time I'll show you another option. Start by zooming in to a close-up of the MOC's edge somewhere.

By the way, if you haven't discovered it already, you can always move your image around (if not all of it's showing in the window) by placing any cursor on the image somewhere, holding the SHIFT key, and dragging it.

2) Go to the TOOLS box, and select the ERASER tool.
3) Up above, you can adjust the ERASER to your needs (just as you'd adjust the BRUSH tool). Click on the box with the squiggly line, and a drop down should appear with different lines. Select one that looks soft (like it's been airbrushed). Next box over will allow you to adjust it to whatever size you need. And for erasing, I'd suggest an opacity of around 50% (which is another box right there with the others).
4) Go to the LAYERS box, and when it drops down, highlight the layer with your MOC (probably Layer 1).
5) Now you should be able to use the ERASER tool to remove the hard edge around your MOC by erasing it slightly.

This ERASER is another great tool for adjusting your image. Just select which layer you want to work with, and you can go in and remove anything. Mess with it some when you have a chance. Try different opacities, different brush styles, and different sizes to get a feel for it. (go ahead, Vonthako...we know you want to!)

Then once you're finished, you can save it as before. If you run into any problems, don't hesitate to let me know. Once again, good luck with it, and let me know how it went!
| November 6, 2009, 9:46 am
 Group admin 
Quoting Tom R.
Mr.Kelso I can't nearly thank you enough! A great lesson this was! I hope this time it didn't take you 45 minutes. Once again I thank you for helping me and most likely many many other members of the Pages'.

Glad to do it. If others have interests in using Photoshop for better presentations, this will help them as well. So it's all good!

| November 6, 2009, 9:56 am
 Group admin 
Quoting Architect of Vonthako
Artificially-intelligent nanoscopic filters, of course. They process the incoming photons to maintain a safe level of electromagnetic spectrum input.

In laymens terms... sunglasses.

| November 8, 2009, 7:50 pm
Quoting Tom R.
Mr.Kelso I have done it and...
Ran into problems...
The image did not appear in the background instead it was covered by the background. I followed your steps exactly, I might have listened to one thing wrong accidentally. I was wondering if you'd help me.

Your problem is simple and easy to fix. The solution lies along these lines:

1.Select the object
2. Go to the objects tab
3. Select the "arrange" button
4. There you should see some more tabs that state "place object in front of/behind of/in between/ etc.
5. Select the one you need accordingly.

I'm not sure if this is the exact measure to take, since I do not think that you program is the same on that I use. Don't forget that you can also go to the help tab one your program and type something like "arranging pictures on a page" to get more info. Good luck and I'm looking forward to finally seeing the pics! -Dylan

| November 8, 2009, 10:19 pm
 Group admin 
Quoting Tom R.
The image did not appear in the background instead it was covered by the background.

Try following the steps again, and if you get the same result, let me know exactly what step you are on when the problem occurs. Then we can take it from that point forward.

I will say that if your image is covered by the background (assuming that your background is a layer, and your image is a layer), that it's probably just a matter of your layers being out of order. To fix that, you can go to the LAYERS tab and click on it. When the drop down appears you will see multiple layers listed, and they APPEAR IN THE ORDER IN WHICH THEY ARE LISTED (so the first one in the drop down LAYERS box is the one on top; second Layer listed is just underneath it, and so on). So in the LAYERS drop down box, select the layer you want on top, and drag it with the mouse to the top position.

| November 8, 2009, 11:10 pm
 Group admin 
Quoting Tom R.
Will do Mr.Kelso. Still trying to understand this layer problem. I think that's probably it.

I hear ya. I spent a couple of years messing with Photoshop before I figured out how to handle layers. Every book, and I mean EVERY book, I picked up just said things like "go to this layer," or "go to that layer." Not one of them ever said what layers were, or how to create them in the first place.

After some on line tutorials, though, I started to get a clue. Your best bet to understanding how they work is to just experiment. Learning to use them (without someone right there to just show you) is time-consuming and difficult...BUT, it's worth the effort once you get the hang of it, because it can do so much.

I've got to head out of town for the next week, but when I get back, I think I'll do a short tutorial on creating a new layer, and how that can be used in presentation work for a MOC.

| November 9, 2009, 12:04 pm
Other topics

LEGO models my own creation MOCpages toys shop MOCpages Advice

You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2018 Sean Kenney Design Inc | Privacy policy | Terms of use