Commuter, cab driver, high schooler, or just a soccer mom? The '06 Civic is for you!
About this creation
Here's my attempt at a 2006 Civic. Originally, I was trying to make my dad's car, the coupe version, but it turned out looking more like the sedan. However, I kept the rounded back end, instead of making it square. The car features a long, sloped, front hood and window, realistic rims, ground effects, and the interesting use of a cut sticker as rear lights. See pic. 10 for the real 2006 Civic Sedan. Please review, and thanks for looking!
Side view. Notice the long, gradual slope of the front hood and window.
Back view. Notice the sticker lights.
Front view.
Top view.
Front detail. Notice the stubby hood and the long windshield.
Back detail. Those lights are official, coming from 8665 Highway Enforcer. It's just that the middle section is cut out.
Low-down front angle.
Low-down back angle.
The real 2006 Civic Sedan, for reference.
Comments
|
|
 |
I like it |
|
Dale Yarbo December 17, 2010 |
I really like the back of the car and I tried to build one and it turns out to look like the prius and 5/5- D Yarbo |
|
|
|
I like it |
|
August 13, 2009 |
this car really has been a inspiration for me. thx for checking my version out. The front lights is what caught my eyes. I had to use yellow because i don't even have one of those 1x1 transparent white piece. And no i don't use one piece chasis pieces mainly because i have very limited so i built my own which is really a pain in the back because you have to get it at the right height so the minifig can sit in it. And yeah, the dark tinted window piece is really a great piece. i only have one of those so after i built my car and upload i destroy it and use it for a next project. I got that piece from the new release of the LEGO garage, it was for a blue pickup truck in the set. A die for piece for me is propably ANY of the flipping roof pieces with a windshield. Cause man, i don't even have one and i don't know where to get one. Anyways, thanks for letting me join your group, I'm looking forward onto the next contest. TY again and cya at another MOC - Nathaniel |
|
|
|
I like it |
|
June 7, 2009 |
Well, it' a little too bulky to be a Civic, but, good work anyway.
Can you check out my Geonosis? |
|
|
|
I like it |
|
May 30, 2009 |
nice cute little car.:) |
|
|
|
I like it |
|
May 29, 2009 |
To me, it doesn't look like a Honda Civic. Perhaps a Peugot? |
|
|
 |
I made it |
|
May 29, 2009 |
Quoting Sterling Knight
Again, nice for a 4-wide. I would like to se possibly a front hood being two studs long instead of one and the lights raised by one stud with the fitting of a silver plate in the center. Could have been nicer, but it doesn't scream "Civic" to me. 3/5 ~S.K.
Trust me, you DO NOT want this hood to be two studs long. I've already tried it. It looks like crud. |
|
|
Again, nice for a 4-wide. I would like to se possibly a front hood being two studs long instead of one and the lights raised by one stud with the fitting of a silver plate in the center. Could have been nicer, but it doesn't scream "Civic" to me. 3/5 ~S.K. |
|
|
|
I like it |
|
May 29, 2009 |
Cool little car, keep it up. |
|
|
More from Dax More across MOCpages
|
|
|
