a working belt fed M249 PARA (aka FN MINIMI), fires Rbs off a minigun mech.
About this creation
well, the time has come for me to post a new gun. this time i decided to make a proper LMG, and chose the M249 SAW (aka the FN MINIMI). this was gong to be a challenge for several reasons: it was a big gun, so i didnt know if i was going to be able to finish it with the pieces i had. i went for the smallest option - the PARA. then there was the problem of a hi-cap RBG mech, and then the problem of fitting the electrics in. i knew the chain mech wasnt going to be a problem, as i had actually started building this gun a few months ago, completing the chain mech and clicker, only to break the gun unfinished and make something else.
this is the small version of the M249, the M249 PARA. it has a shorter barrel and a folding stock, but retains the magazine port that the M249 SPW lost.
i could spend a long time telling you about all the features/purposes of the SAW, but instead of boring you, ill get onto what my gun does. it features:
-belt fed (tank tracks as the chain)
-built in clicker, that clicks once every time a chain link passes through the mech
-working hi-cap RB minigun mech at the front
-folding stock (also can be detached)
-removable chain box with opening lid for loading of the chain
-realism mech that stops the gun firing if there is no chain in the mech
-great looks XD
basically, there are 2 old-style 9v battery boxes in the gun. one is turned on when there is a chain in the port using a clever little mech, the other is turned on when you pull the trigger. these are connected through a micro version of my transformer (took a long time to work out how to make) to a motor and a switch. the transformer output will only turn on if both inputs are on, this stops the clicker working if there is no belt in the feed.
the motor powers the chain feed mech and a clicker. the chain feed cog has 6 notches/teeth for the chain pieces, so i sped the mech up using a 2:1 and a 3:1 gear system and then added a clicker that clicked once a revolution. this provides a 'gunshot' noise if there are no RBs being fired.
the switch leads to another motor, this one powering a thread reel that pulls he thread off the minigun barrels to make it fire. the switch is ued because once all the RBs are fired, the motor keeps pulling at the thread which is attached to the minigun barrel. i had to attach it because otherwise every time i used it i would loose the thread in the inner workings of the gun. and have to take the whole thing apart to find the end. the switch is basically to stop me from breaking the motor when the RB mech is empty.
pics: the gun
left side (stock retracted)
same, right side
ammo box removed
the ammo box
the lid lock (the lid is on the bottom)
pressed in, and it unlocks
so that you can open the lid
the ammo: an 85-link chain and a load of RBs
the cover opened
the belt port
with a belt in
the clicker mech (that blue thing is the clicker)
the folding stock, folded
the carrying handle (VERY flimsy, only used for looks)
the minigun mech
the minigun barrel, loaded
the switch for the thread motor, set to 'off'
set to 'on'
looking down the sights. the carrying handle is only just out of the way, sometimes its better just to take it off.
Dear Jack... i still love your legomodelguns... before five month ago, i had buy your book and build all the guns, but now... I NEED MORE OF YOUR STUFF.... please send me, what i can do... for more instructions...???!!!
to: email@example.com, or at my writerhomepage: www.a-w-bergmann.com your greatest german fan...:-)))
I got your book and I'm trying to make the desert eagle and I'm failing on the trigger cuz i tried 2 use a 1x7 technic thing but it got jacked up so im trying to use a 0.5x6 technic brick and it gets messed up. But anyways i like this M249
EVERYONE! BEFORE POSTING A COMMENT READ THIS! HE HAS NOT A SINGLE BOOKLET, PIECE LIST, INSTRUCTION FOR ANY GUN OTHER THAN HIS H&K M416
SO STOP FREAKING ASKING! HES NEVER, NEVER, NEVER EVER GOING TO GIVE THEM OUT CAUSE HE DOESN'T HAVE ANY! SO LOOK AT EVERYONE ELSE'S COMMENTS AND ASK IF THEY GOT THE INSTRUCTIONS FROM HIM OK.
hi i love you work there, the gun is the best gun i ever seen!! can you please send me the instructions to firstname.lastname@example.org
you are the best builder i ever seen! i have seen you other guns and all of them are so nice
regards an happy builder.
One of the best rubber band guns. Not just Lego, but THE best gun I have seen.
I like it
September 2, 2009
Very nice!! excellent! perfect M249 para;) right to the details! and the belt and box magazine system, just fantastic!
A+++ Well done! but that was expected from your inventions!:D
I like it
September 2, 2009
Great job the handle looks great (even if can break easily) the shape is really perfect though.-George
I like it
September 2, 2009
just wanna make clear that this is a awesome gun. very good job, but I've got a couple of questions. 1) how does the belt switch work (when there is no belt it wouldn't fire). 1)How does the "I stop cuzz there are no RBs anymore" switch work. 3) the gun uses 2 motors? (in case of yes which motors, I guess you are not using the PF motors) well that was pretty much it;) 5/5!!!!
AWWW you took my idea on the ammunition belt before I could even make a gun with it. I gotta make a gun fast when I come up with an idea... Random people on YouTube are starting to get to them before me...