MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop Final version of Airbus A340-600Flight
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
Final version of Airbus A340-600
Aircraft, Airplane, Plane, Airbus, Boeing, Commercial, Airport, Aeroplane
About this creation
Im sure most of you will be glad to know that this is my final attempt at an Airbus A340-600 as I am sure you are sick of looking at all four versions by now!

With exception to the horizontal stabilizers and the landing gear, the model has been completely rebuilt.

- The fuselage was reduced in height by one flat piece resulting in a longer looking fuselage but with the same original length.

- The wings have been comepletely remodelled however it may not be noticable at first glance comapred to the older model attempts.

- I must admit now that I have cheated a little bit in this model...I have made my own lego pieces by cutting several wedge pieces in half to get the desired curved shape at the top of the nose and tail sections. Has anyone else ever done this? Please let me know!

- The engines have been rebuilt using slope pieces instead of the old curved pieces. Using the sloped pieces created a more 'curvier' engine.

- I did promise to put Iberia stickers on this model, but I never got around to it, so I compromised by attempting to put the Iberia logo on the tail. All the photographers are mainly of the left side of the model, as the tail logo on the right side is back to front!!!

- Again like previous models, the nose and tail sections have been made curvier!

- The tail itself has been reduced in size as in the previous models, it was oversized!

Things that could be improved.........include.......

- Iberia wingtips are white, not red!!!

- The wings could have a larger slant (angle), however this is the closest I could get the wings to the correct slant....I had to choose between the 6 x 12 wing plates and the 45 degree angle wedges.

- The wings could have had working parts, such as flaps and speed brakes but I honestly didn't think I could incorporate them into the wing without completely altering the wing shape (which I have spent months in getting as close as possible to the real thing!

Enlarge image
   Note the road map in the background... essential for Farnborough 2006!!!! :-)

Enlarge image
   Within the picture, I have included the scale model I used to create the lego model.

Enlarge image
   mmmmm... sorry for the untidy room. Its in the middle of getting cleaned at the moment!!!

Enlarge image
   Daddy and little kid.....

Enlarge image
   Lego models are seem to look good in crap lighting means you don't really see the shadows of the crappy wedges plates giving it a more 'curvy' look! Note the new wing shape!

Enlarge image
   Back to the kitchen floor again....

Enlarge image
   Note the tail logo. Squint your eyes and you might be able to recognise the Iberia logo.

Enlarge image
   The top of the nose has been remodelled with wedge plates. This is where I cut up several wedges pieces...thus giving me the desired shape where the wedges plates meet the slopes bricks.

Enlarge image
   Remodelled engines. Curved bricks replaced by slope bricks

Enlarge image
   As I said before, front views do not do lego aircraft any justice!

Enlarge image
   As usual, I retained the two cargo doors on the lower fuselage. 2 each side (2 left and 2 right)

Enlarge image
   Picture showing the general underside of the wings and fuselage.NOte that most of the wing underside is white and apposed to white grey and black in previous models

Enlarge image
   The triple undercarriage has been retained.

Enlarge image
   I believe this picture depicts the curvy rear end of the fuselage!

Enlarge image
   Shows the size of the moidel compared to an averages sized dinning room table.

Enlarge image
   I have been asked what is inside the model....well nothing most to be honest. Its mostly just bricks to help strength, otherwise it would break rather easily. This model is not to scale of lego figures as lego figures are completely out of proportions. IN this scale, the size of the person could be roughly the size of the cannon balls (1x1 brick with curved sides with a 1x1 curved plate as a head).

I hope you have enjoyed these a340 models as much as I enjoyed making them!


 I like it 
  January 22, 2012
A great model and a lovely livery! I have always been fascinated by Iberia's colours, so this is a wonderful sight for me...
 I like it 
  April 20, 2010
No problem with the Iberia logo! In a small pic I was able to identify your plane as an Iberia A 340!!! So that is excellent!
 I like it 
  June 4, 2009
Thats brilliant, well done. It looks enormous! Sterling job. 5/5
 I like it 
  November 28, 2006
Very extraordinary! How did you get all of those wing (slanted) plates (flats)?!! Please answer!
 I like it 
  July 28, 2006
Excellent. The shape is perfect. I am simply blown away.
 I like it 
  July 16, 2006
that's cool, looks nice! you sould try and build the new airbus A380. It's the bigest plan that airbus has made.
By Dave Henderson
Add to my favorite builders

people like this. See who.

16,572 visitors
Added July 16, 2006

LEGO models my own creation MOCpages toys shop Final version of Airbus A340-600Flight

You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2018 Sean Kenney Design Inc | Privacy policy | Terms of use