MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop Shop
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
This is a simple shop with 2 large windows and a glass door. It is built on a 6 X 16 grey plate and has 1 stud bricks for walls. It features transparent green and blue bricks and a custom LED lighting system. Please Comment and Rate!
About this creation

It looks a bit middle-Eastern, so I'll say it's a Persian rug retailer.

I built the lighting system. It is comprised of three warm white LEDs mounted on a piece of vero-board (perforated strip board) in parallel with a 680 Ohm resistor and connected to a 9 Volt battery.

It has a 2 X 1 transparent blue brick on the back to mimic the blueish light of insect repellers often found on the backs of shops. You can see the thin wire lead coming from the small gap in the brickwork. This connects to the battery.

It glows nicely, as the warm white LEDs produce a light just like that of traditional incandescent light bulbs. I added the transparent green light bricks for a bit of charm, making it one of the more colourful shops in a Lego town!

The transparent green bricks on the sides cast a nice green glow over alleyways or neighbouring buildings.

It has an arrangement of slope bricks on the top, so it has a more grand appearance. Their spacings were a little inspired from the castle buildings.

I used another 6 X 16 grey plate for the roof of the building. I think old grey and yellow make a good colour combination.

I love the way the transparent green bricks pick up the light!

The white bricks along the bottom run around the whole building and lead-in to the white windows and doors on the front.

These photos are with the LED lighting off.

It has an interesting and unusual outline.

Each side of the building is identical - keep it simple!

It would be difficult to fall off this roof!

Beside the hole, there are plate that actually hold the LED lighting circuit board in place. They include, from the bottom, 2X2 plate, 2X4 plate (the holder) and a 2X3 plate sideways, to minimise the size of lead's exit hole.
The 1X2 transparent blue brick is directly in front of the LED circuit board, so the light from this small brick is fairly bright!

It was made entirely from standard and very common bricks, with plenty of room for improvisation if you don't have exactly the same pieces.

I hope you like it! Please Comment and Rate!


 I like it 
  July 24, 2012
A great looking shop - I like that it looks like a crown.
 I like it 
  March 14, 2011
Cute shop - the colours work well and the lights are great. It just needs something to sell.
By Polomoche Mann
Add to my favorite builders

people like this. See who.

1,560 visitors
Added March 14, 2011

LEGO models my own creation MOCpages toys shop Shop

You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2018 Sean Kenney Design Inc | Privacy policy | Terms of use