a smooth turn down the rail and were good to go bill!
About this creation
this is the tutorial on how to make the Monorails curved track.
GIVE MOST CREDIT TO "MASAOHIDAKA FOR THE ORIGIONAL DESIGN.
Most of this "curved track" is not my own design, im just showing all the moccers how to make their own.
also, this is a prototype, so i really didnt care about what the colors looked like.
So here it is,
The finished track, not bent(you have to "bend it")
this time it is curved:
HOW TO MAKE THE CURVED TRACK:
what you will need is:
2x2 smooth tile plates
2x2 brick studded
1x2 brick studded
take the 2x2 brick studded, and take the 1x2 brick studded and connect 1 to each end, on the same side(shown in the right side of picture)WARNING!you CANNOT use a 1x4 becuase then it wont turn the track! Now take another 1x2 brick studded and put it in the empty space . NOW leave the rest alone.
Now take another 2x2 brick studded, and only connect one, 1x2 brick studded to the top of the 2x2 brick(shown in left side of picture)
here is Step 1 and 2 completed in picture format:
take the two parts you've just created and connect them together as shown:
repeat the procces of steps 1 and 2 to have your curved track:
finish it off with the 2x2 smooth tile plates and your done! just connect the 1 stud end to your monorail track and you now have a curved track!
i hope this helped. i know it did for me, thanks for checking this out, and remember, this is masaohidakas origional design, so GIVE MOST CREDIT TO HIM!!!!