1)Attach the handle and the trans-yellow/green stud to 1x2 blue plate.
2)Attach a blue 1x2 tile to the handle and tilt it forward.
Plasma rifle parts
1)Put all of the parts together as shown.
Brute plasma rifle parts
1)Assemble the same as the plasma rifle.
1)Put together the 1x4 and 1x3 red plates, and the 1x4 dk. gray/bley tile.
2)Attach the 1x2 red tile to the handle, and slant forward like in the plasma pistol.
Needler V2 parts
1)Put together both hinges, and attach.
2)Attach 1x2 trans-red grill tile.
Needler V1 parts
1)Put together clicky hinge, add 1x2 black plate on the bottom.
2)Add the 1x2 trans-red grill tile.
Energy Sword parts
1)Put two 1x2 red plates and the lightsaber handle together.
2)Connect the 1x2 and 1x4 red plates slightly.
3)Attach steps 2 and 3, as well as another 1x4 red plate.
Fuel Rod Gun parts
1)Connect the headlight brick and the cross-coupling to the weird Technic plate-thing.
2)Add another Technic plate.
3)Add trans-green/yellow parts.
Brute Shot pieces
1)Connect most of the pieces as shown.
2)Add a (preferably a solid color) single round stud and the blade.
3)Finally, attach the 2x2 round slider plate thing.
Thanks for visiting, please leave a review. If you are crazy enough to want to use my weapons, give credit please. There are no instructions for the Beam rifle yet, because I have to take pictures of the new version.
There alright, but the main reason i'm reviewing is to tell you what i meant on the halo 3 equipment page. I was referrring to the last picture of that MOC, not the one with the grav lift. I know what i'm talking about, besides, his grav lift has no crystals.
I like it
January 21, 2008
awsome guns i used yur beam sword but mine is black!