MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop Sawn Off Double Barreled ShotgunWeapons
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
Sawn Off Double Barreled Shotgun
Surprise post with build diary! Also features a review of Jeff Boen's Brickgun Book. This gun is something I've wanted to build for a very long time, finally got round to giving it a go.
About this creation
So it was the holidays, I was back from uni with a lot of time off... who wouldn't had a little build to keep themselves occupied?

I'm also going to slightly cheekily use this post to promote some of the new No Starch books - if you took the time to check out Beautiful Lego, Lego Space, The Lego Built-It Book, and The BrickGun Book (reviewed lower down), I'm
sure their respective authors would be made very happy!

Build Diary
BrickGun Book review

The double barreled shotgun is a weapon I find particularly menacing. It's got the ability to pepper the target with pellets, and if it's sawn off then you're also probably going to be hitting the surrounding area as well - so it's a real room-cleaner. The general design and simplicity of reloading also makes the gun more thuggish - because an intricate, complicated mechanism would make this "interesting" ...instead of just giving it an essence of brute force.

I've taken a bit of a step away from my usual "model replica" here - because it started out as a VG Bentley replica (think Mad Max), but I found the grip far too long to hold comfortably so changed the shape a fair bit. The lucky thing about double-barrels is that they're relatively generic, compared to the things I normally make, so this tweak didn't make the gun lose any authenticity as a "double barreled shotgun", even if it wan't quite what it set out to be.

So... there's not really a "feature list" to create here, because, as we know, double barrels are inherently very simple. Essentially, mine has a two-trigger setup (front trigger fires right barrel), a simple break-open catch, and fires bricks (with power to rival the Jungle Carbine, in fact!). There are two hammers, both cocked by the same hidden cocking handle (hidden inside the foregrip), and an interesting design point is that the hammers travel past the hinge. That is to say, they start in the front part of the gun, about half-way down the barrels, and then when cocked, they lock into the rear part, just under the break-switch.
One of my favourite parts about the hammers themselves is how they work. I was faced with several possible ideas of how to cock them (including a lever that cocked them when the gun was broken open), but the one I went with involved cocking the hammers separately. In order to not leave the bands stretched for too long etc, I thought it would be better to allow the hammers to be cocked with or without any bricks in the chambers. This presents a problem though. In previous builds, the bricks would be in magazines, and when the hammer past over them, they would simply be pushed lower down into the magazine. You can't do this with a chamber though, because the brick is essentially locked in place. My eventual solution was to create a hammer with moving parts, and it turned out to work very nicely. Essentially, the hammer features some fixed wider parts that slide in the rails to guide it down the barrel, and a sort of "ratchet pawl" part, that is sprung by one of the hammer's rubber bands and allows the whole thing to collapse slightly as it passes underneath the brick in the chamber. Problem solved!

There are more things to mention, but I've already rambled for long enough here, so I'm going to start the picture run. Build diary a few pictures in!

Right Side

Left Side


Another view - notice the red "cartridges" in the chambers

The Break Catch - this actually got re-designed while taking the photos for this post, there's an updated version lower down.

Broken open, showing empty chambers


More Loading...

Back Half

Front Half

Underside - notice the hidden cocking handle (it goes to the very front of the grip)

Two fingers on the triggers (this may be very bad practice, I've never been taught how to use a double trigger setup!)


Down the "sights"... this would normally consist of just looking straight down the barrels, but here we see a lump sticking out at the near end of the barrel: this is for locking the bricks in place when they're in the chambers

FPS, broken

About to cock it

Cocking it

Another view

The two halves separate by simply removing one 7M axle. The two 0.5M thick 4M long liftarms sticking out of the back half are used to disable the cocking handle when the gun is broken. This stops anyone cocking the gun open, and finding the hammers have fallen off because they've run out of rail to slide down!

Looking down the barrel, you can just make out the hammers towards the main inside wall

Looking in towards the trigger mechanism of the back half

The (old) Break Catch (built with a sneaky bit of SNOT). When this is attached, the catch itself slides on top of the top-most technic beam shown in the next picture.

View of the top of the back half, with the Catch removed. As the hammers were only 1.5M wide (and this involved some piece modifying, I add), the best way to create rails for them to slide down was to use technic bricks with flats on as the "walls" (if sideways), and normal liftarms for the "trough" parts

The entire back half, "field stripped". The back half wasn't a very modular build, as shown by all the little bits that had to be removed before I could prise off the main wall.

Closeup of the trigger mechanism(s). Notice the filed down "1M" pins, the same ones that were used in the Desert Eagle. Again, they were incredibly useful due to having to fit everything inside a 4M wide body.

Front half. This is a closeup of the method used to "join" the top beams to the bottom ones - a clotheshanger piece and a 5M liftarm. Other ideas are shown in the build diary!

Underside of the front half, with the bottom plate removed. The "fingers" that mesh into the back half to form the hinge have been exposed

The front half turned out to be much more modular than the back. Here I've removed one of the lower walls, exposing the right hammer and the "bolt" part of the cocking handle. This was the third version I made, the other two had various faults that kept making them break.

Close up

Front half entirely stripped

This seemingly innocent combination of parts felt like a stroke of genius - it creates a sort of lock, to fix the two walls together.

The pins fit into corresponding holes in the two walls, and the brown axle is then pushed up into the barrel-module to lock the pin itself in place.

Having the extra 4M liftarms on one wall helps when arranging the rubber bands from the hammers and the cocking handle around the various parts of the inside

The hammers and the bolt/cocking handle, all removed. Note how the hammers are spring-loaded to expand, and how this is only powered by one of the three bands. The grey axles here were originally two 3M axles, but got cut in half to form four 1.5M axles.

Detail of how the hammers get locked in their rails by the trigger mechanism. Ignore the placement of the hammer's bands, that was only done to keep it in place so I could take the photo.

The entire gun, stripped into all the little bits

The updated Break Catch. The catch itself isn't that much different, but...

I've replaced the 5M liftarms with 4M tiles, because the hammers were occasionally springing themselves too far up and getting stuck in the holes (something I never suspected was possible). The lack of pins to attach the rubber band to then resulted in the rest of the redesign.

Here I'm showing how the liftarms protruding from the top of the barrel can be pulled back to release the pressure on the bricks in the chamber, allowing them to slide out easily

One more shot of the gun, and we're on to...


Initial work consisted of printing off a 1:1 template, clearing up my room (fun), and then getting out all the Lego (notice a familiar face?) and making a mess...

Initial prototyping consisted of working out the best barrel design (notice how in my final design, the slits in the main barrels for the hammers are too wide - this stops anything getting stuck. It also managed to create an impression of curviness/roundness of the barrels, which improved the overall look)

These are some of the ways I tried to strengthen the barrels by rigidly connecting the top beam to the very bottom. The ideas here revolved around using a thinner-than-1M-beam going between the barrels (making it thin meant nothing would hit it on the way down), but in the end I decided to make the connection on the outside of the barrels, as seen in the final model. The filing down of the grey pins was done to provide a pin that was just long enough to secure the plates, as shown in picture three.

With a semblance of a hammer and bolt mechanism realised (see first photo), it was time to commit to the build by breaking up the Enfield (sadface) in order to convert the initial, multicoloured prototype into the beginnings of the real thing, using the now-available black bricks

And with that done, it was time to start work on the trigger mechanism. This turned out to be quite tricky, hence the multiple designs.

Finally, some back and forth on the front and back of the gun, and then suddenly....

It was done!

And after all that, it's time for...


So this is the latest in No Starch's run of gun books... and again, it's from someone we're all fairly familiar with! Jeff Boen, the author, is the man behind, a website that greatly inspired me when I was starting out myself; I'm sure most of you are already familiar with it too.
The book's main attraction is the fact that all the models are incredibly realistic, in fact it seems Jeff has taken a completely opposite approach to me in terms of building: he's gone for form above function, I would normally reverse that. But that's not to say that the "function" part has been in any way diminished - four of the five guns in the book feature very efficient little mechanisms that make the gun "click" as the hammer falls, and allow the slide to be locked back, and so on... and then the fourth model is a very familiar rubber band gun.

Jeff starts the book with some text about the when, why and how he started building the models, giving some design history and a few insightful building tips - don't skip the theory, students!

Looking at the instructions themselves, the first thing to notice is that the guns are mostly made from normal bricks, with the occasional bit of technic thrown in, and this is reflected in the style of the picture - 3D, isometric and using plain shading to maximise "readability". There's a photorealistic rendering for each gun, though, at the start of each chapter, followed by the corresponding bill of materials (BOM). This is where I have probably my biggest gripe about the book - the BOMs are done twice for each model, once by text with the part name, quantity, description and colour, and once again, on the next page, with a picture of the part next to its quantity (which is how Lego themselves do their BOMs).
This, I think, creates a slight problem in that if you have a certain number of pieces already, and only want to buy the new pieces you need, then you would match the pieces you had to the pictures... and then find that you didn't actually know the part numbers for the pieces you still needed, because they're not listed on the picture BOM, only in the text-based one. However, it doesn't take much more effort to match the parts you have to their descriptions in the text BOM, so as I say - it's my biggest gripe, and it's actually not a particularly big one.

The guns though, are very well done, using some really ingenious techniques (I particularly like the transition from SOT to SNOT in the muzzle of the BG 22) and very efficient use of space (when I built guns this small, I usually ended up having to modify pieces, Jeff's managed to avoid this). The only critiques I can even begin to come up with are the lack of cross-bracing (something that I use a lot), and how some of the rubber bands are attached. However as these models are smaller and more "models" than "toys", the lack of cross bracing isn't such a big deal and as for the rubber bands... essentially what he's occasionally done is looped a band over parts with no discernible "hooking" bit to stop the band sliding off. I imagine this could create a problem with bands with a round cross-section, but if they're square then you should be fine.

For the four models with "clicking" mechanisms, Jeff's essentially taken the same mechanism and put it inside four different bodies. I actually fully approve of this, because while it's not as mechanically diverse initially, I think that this book is maybe aimed at the slightly less technical builders - who could benefit immensely from being shown an example of realising the same concept in different ways, which is an incredibly useful skill to learn.
The Mac-11 is the rubber band gun of the book, and again, the mechanism isn't overly complex, something I think is a good idea: after showing a young builder how to adapt a mechanism to fit in different guns, Jeff has gone ahead to show them a new mechanism, one that they can maybe tweak to put in their own models using the new skills he's provided them with. The fact that all the guns are fairly small means that these younger builders will still be able to afford to buy the bricks to build them, without having to live on cereal for a month.

All in all, I think Jeff and No Starch have done a really good job here; it's an excellent guide and a very worthwhile buy. Thanks Jeff!


 I like it 
  July 23, 2017
Cool shotgun.Please send me instructions
 I like it 
  March 28, 2017
Please send me this instruction
 I like it 
  February 5, 2017
Mande me esse manual para
 I like it 
  January 1, 2017
This is one of the best Lego guns. Please send me the instructions to
  December 14, 2016
Where do I buy this gun kit?
 I like it 
  December 11, 2016
Pls send me a instruction of this gun
 I like it 
  October 29, 2016
can you pls send me instructions for this amaing gun to PS: I have your book heavy wepons and it is amazing
  April 15, 2016
Please can you send the instructions to ? If you could, it would help a lot!
 I like it 
  February 20, 2016
Please send me instructions to That looks beast.
 I like it 
  October 12, 2015
Pls send me the instruction to I bought ur book and building the aks47. are you jack streat
  September 19, 2015
Please. Send me the instructions to
 I like it 
  September 19, 2015
Please send me the instructions to
  July 14, 2015
Hello Jack please send me the instructions to i would love to build it. PS I have your bok it awsome.
 I like it 
  June 4, 2015
Please send me the instructions to Please~~~
 I like it 
  December 10, 2014
Please send me the instructions to
 I like it 
  December 3, 2014
pls send instructions to
  August 1, 2014
please send the instructions to
 I like it 
  April 9, 2014
can you send instruction to please ? ^^
 I like it 
  March 11, 2014
Please give instructions to
  January 9, 2014
please send instructions to please
 I like it 
  November 3, 2013
could you send instructions to please
 I like it 
  October 7, 2013
You make the best lego guns ever jack. I have attempted many times to make lego guns and have failed EPICLY. Please send info on the mech of the aks74u please please please please I need help I look up 2 you please reply to me I am at Please help jack, I will thank you so much!
 I like it 
  September 28, 2013
there aren't any instructions for this gun!!!
 I like it 
  September 27, 2013
Love it can you please send me the instructions email:
  September 25, 2013
Can u plz send instructions
 I like it 
  September 6, 2013
can you send me the instructions, please? e-mail:
 I like it 
  September 2, 2013
Looks awesome and its good to see you building again.
 I like it 
  August 31, 2013
This is amazing! I thought you were gone for good, I was mistaken clearly haha, glad to have you back.
  August 30, 2013
This is amazing! Could you send instructions to
 I like it 
  August 30, 2013
I thought you'd never come back! This is a truly amazing gun, definitely one of the most impressive ones you've ever built. You're just brilliant!
Jack Streat
 I like it 
Egor Alexeev
  August 29, 2013
OH MY GOD! THIS SAWED-OFF IS AWESOME!!! I want to hold this Obrez in my hands! God!
Jack Streat
 I like it 
Dr. Monster
  August 29, 2013
Absolutely fantastic! The pair of triggers is amazing. What a great design.
 I like it 
  August 29, 2013
  August 29, 2013
jack streat first you rock. second i have designs for a Lego shot shotgun (its in production )can you email for design, i would like you to build it better then i can.
 I like it 
  August 29, 2013
woow!!! very nice build!!! im very glad you are building again, even if its for a little while :) the mechanism is brilliant!! eill you build more guns?
 I like it 
  August 29, 2013
one word - WOW this is amazing. how do you manage to get a 1:1 template?
 I like it 
  August 29, 2013
Yaaay, Jack is baaaack :D
 I like it 
  August 29, 2013
we all missed you very much jack! excellent build, its the best double barrel i have seen! can you check out my guns please? i would be honored. -Silly
By Jack Streat
Add to my favorite builders

people like this. See who.

22,417 visitors
Added August 29, 2013

LEGO models my own creation MOCpages toys shop Sawn Off Double Barreled ShotgunWeapons

You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2018 Sean Kenney Design Inc | Privacy policy | Terms of use