MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop SD-01Mecha
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
Rate it  12345       Add a comment Add a comment   Zoom in  Zoom in
Prepare for a load of pictures and text!
About this creation
This is a part of a project which has taken way longer than expected. Half a year! it took me about 6 months(started around September 2013 and finished early February 2014) to build this and it is only a part of the project, which will include another mech and some military vehicles. Although I am very pleased with the outcome of this mech. Compared to the previous mechs that I have built this one was built with a focus on articulation over looks, and the end result is a total of 46 points of articulation! and I believe that it is a high count for a ~20 cm/~8 inch tall figure.

The reason as to why I started this project is because I started to watch a lot of Gundam, and suddenly I felt the urge to make new mechs. I have no idea as of when this project will finish as I sort of want to take a break from it, but I am sure that I shall finish it.

This post has a lot of pictures because I want to go though this models articulation properly. I have thought of making a video shoving of the articulation, but I don't
have a camera that is good at making films.

First of some pictures of the model



Close-up of the upper front:

Close-up of the head:

Close-up of the back:

And now for the articulation

The Arms

Around the shoulder there is a great range of movement because there is a double ball-joint. The arm can stretch forwards:

The inner ball-joint makes the arm able to rotate 360 degrees.

The arm can go all the way out to the side:

and this far up:

The elbow has a double joint, so that it can do a 180 degree bend:

The hands
This is the second design for the hands, but compared to the previous design these have less movement but more stability. The hands look good opened and closed when holding an item. They do not look good as closed fists because of the lack of joints in the fingers.

Open hand:

Here is the previous hand design. the main problem with it was that most of it was built with the robot hands and they are good for small joint but they are just too loose, so whenever I tried placing an item in the hands thy would give in to the weight.

The Torso
This was the last area to be finished, because I had a hard time deciding which kind of style I would go for. in the beginning I had planned to make it fit a minifigure, but it would result in the torso looking too large in proportion to the limbs.

From the front it bends at almost 90 degrees.

But not nearly as much backwards.

To the side it can bend just past 90 degrees:

this is the joint that holds the sword holster. Originally I had made two of them, but I had to remove one because of weight issues.

The Legs
To me this is one of the more important parts of the mech, since I wanted the legs to have a double-joint so that they could bend 180 degrees and I also wanted a sliding part so that there would not be a gap when the legs were bent. Because of that I started working on the knees and after that I built the rest of the legs. but the first knee design was not strong enough to support the mech, so a had to build new ones.

This is the lowest the legs can go whilst still standing on the feet:

These are the two knee designs I built: the new one to the left and the old one(my favourite) to the right. the problem with the old one was that it used the robot hands for the joints, so it was really weak.

Here they are both bent

The feet
these feet have a surprising amount of movability and they are quite stable. It did take a while to build these since they would have to rely on hinges and sliding, because it wasn't until this year that the small ball-joints came and as of now they are not available in black.

This is how the ankle bends:
a href="/image_zoom.php?mocid=383975&id=/user_images/81584/1395254757m">

The front section of the foot can be bent and the sole can be adjusted as well:

doing the splits:

High kick:

The head
This is the first thing I built for this model.

Here is the inspiration to the rabbit ears/antennas:

But since it is not made out of LEGO® it should
not be in this review, so SD-01 get rid of it.

SD-01: This is my review!

And back to the review.

Both of the rabbit ears/antennas move:

Looking up:

Since the rabbit ears/antennas do not move with the head when looking upwards or downwards, it gives an interesting effect when looking straight at the face.

The sword holster

I tried to build it as slim as possible, but I could not make thinner than two studs.

And inside the sword holster there is: A sword!

The sword next to the holster:

Here is a picture of the mech with the sword holster:

That was all for now. Bye!


 I like it 
  August 9, 2014
Really nice robot. I like its highly articulated body. Using a TSF as inspiration is also a good idea.
 I like it 
  May 30, 2014
This is pretty cool. The body is quite detailed, for that matter most of it is. Keep up the awesome builds
 I like it 
  March 20, 2014
Not a dragon, but I respect it. Well done.
 I like it 
  March 20, 2014
Cool samurai you got there. Nicely done! ;)
 I like it 
  March 20, 2014
Excellent, I find your technique to give the limb movement just great. The art of suspension parts that have you put together is very Resourceful and well considered. All in all just wonderful.
 I like it 
  March 19, 2014
Cool! Looks like g1 shockwave.
 I like it 
  March 19, 2014
Very nice articulation and design! The color choice is fine, but perhaps some highlights could make it really pop! Still an excellent build
By Rasmus Olsen
Add to my favorite builders

people like this. See who.

2,058 visitors
Added March 19, 2014

LEGO models my own creation MOCpages toys shop SD-01Mecha

You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2018 Sean Kenney Design Inc | Privacy policy | Terms of use