MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop Bugatti EB110 GTVehicles
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
Bugatti EB110 GT
Rate it  12345       Add a comment Add a comment   Zoom in  Zoom in
'91 Bugatti EB110 GT, built for the 'Speed Champions Building Contest 2017' in 7-wide. I hope the car will be allowed, because the standard width for Speed Champions cars is 6-wide.
About this creation
Link to the contest: Speed Champions Building Contest 2017

The Bugatti EB 110 was a mid-engine sports car produced by Bugatti Automobili S.p.A. from 1991 to 1995, when the company went bankrupt. It was the only production model made by Romano Artioli's Italian incarnation of Bugatti.

Performance:

0–80 km/h (50 mph): 2.6 s
0–100 km/h (62 mph): 3.6 s
0–140 km/h (87 mph): 6.5 s
0–180 km/h (112 mph): 10.8 s
0–200 km/h (124 mph): 14.0 s
Standing kilometre: 21.3 s
Top speed: 336 km/h (209 mph)

(Source Wikipedia)

1-1 Front

The mirrors should be blue, instead of black, but due to a lack of appropriate parts they will have to do the job. (Yeah, they are made from carbon)


1-2 Left Side 3_4 Front


1-3 Left Side

I like how the side-profile turned out!


1-4 Left Side 3_4 Rear


1-5 Rear

The rear was tricky to get to look right...


1-6 Top


1-7 Top 3_4

The blue tile on the roof looks a little bit out of place from certain angels.
But, since I didn´t want use a custom sticker there and keep the car as purist as possible, the blue tile will have to do the job recreating that part of the roof.


The following pictures show the car with its spoiler extended:

2-2 Left Side 3_4 Front Wtih Spoiler


2-3 Left Side Wtih Spoiler


2-4 Left Side 3_4 Rear Wtih Spoiler


2-5 Rear With Spoiler


2-6 Top With Spoiler


2-7 Top 3_4 With Spoiler


3-1 Hood Intakes

Engine intakes, just like on the real one!


3-1 Hood Intakes With Spoiler


4-1 Engine No Window

Something engine-ish, I managed to squeeze inside.



4-2 Engine Hood Removed

Here, a better view.

5-1 Top Minifig

Of course, it does fit a minifig.


5-2 Top No Minifig


5-3 Top 3_4 Minifig


5-4 Top 3_4 No Minifig


6-1 Posable Intake Open

Side intake can be opened, unfortunately the window behind it - not. Oh well...
The roof sits a little tight then, but it works.


6-2 Posable Intake Closed


7 Bonus Pic With 275GTB And Improved Quasar

Bonus pic with some other SC creations from me, to show that it's not too much off scale:

Ferrari 275GTB and (Improved) Peugeot Quasar.



Comments

 I made it 
  March 23, 2017
Quoting Parrington Levens Another beauty mate :)
Thanks again, Director!
 I like it 
  March 23, 2017
Another beauty mate :)
 I made it 
  March 22, 2017
Quoting Woldan Ab. A lot of details and great shapes for this size, I love it.
Thanks, I was amazed how this car seemed to get together just by itself. Good choice for Speed Champions it seems...
 I made it 
  March 22, 2017
Quoting Daniel Ringuette Beautiful shaping! It looks great from every angle! Love the inclusion of the engine too! Brilliant work!
Thanks, dude! But, including a working transformation feature is completely unreal! Therefore, my hat's off to you! ;-)
 I like it 
  March 22, 2017
A lot of details and great shapes for this size, I love it.
 I like it 
  March 21, 2017
Beautiful shaping! It looks great from every angle! Love the inclusion of the engine too! Brilliant work!
 I made it 
  March 21, 2017
Quoting Ryan Link Amazing!
Thanks! Glad you dig this. Small stuff can be cool too. ~Cheers
 I like it 
  March 20, 2017
Amazing!
 I made it 
  March 19, 2017
Quoting Malte Dorowski ravishingly beautiful!
Thanks, Malte! Much appreciated. ~Cheers
 I like it 
  March 19, 2017
ravishingly beautiful!
 I made it 
  March 17, 2017
Quoting david drake awesome job! How courageous to make a car 7 studs wide when 6 is the norm!
I blame the front end, it looked best in 7-wide! ;-) ~Marc
 I made it 
  March 17, 2017
Quoting Petey Bird Great job on this one! The shaping on the front is very accurate. Love how you did the grille and the tail lights in particular.
Thanks! The front pretty much came together by itself, the rear, especially the tail lights were a little trickier. Since I didn't have any of these half round 1x1 tiles, I hat to find a decent way to recreate the oval shape of the lights. I think the result looks quite good. ~Marc
 I made it 
  March 17, 2017
Quoting Alexander Paschoaletto wow, beautiful! It seems that SC scale has come to stay. Your EB110 is greatly transplanted to it, hats off!
Thanks, Alexander! It really is an interesting scale. An opportunity to build nice cars with even a small amount of parts and also a challenge, to make it look as accurate as possible. At best without using any, or only as much as necessary, stickers. ~Cheers
 I made it 
  March 17, 2017
Quoting Doug Hughes Awesome build! Love the shaping and color choice!
Nice to hear. The blue was an obvious choice for a Bugatti, or the Bugatti an obvious choice for blue parts... :-)
 I made it 
  March 17, 2017
Quoting Andy Sax Impressive job. Really good SC conversion.
Yeah!? Even though it's 7-wide? Thanks, dude!
 I made it 
  March 17, 2017
Quoting Stuart Lucas Wow! Very smooth looking, with an excellent profile. This is going to be one of the ones to beat!
Thank you, Stuart! We'll see about that. Hehe. Can't wait wait to see your comedy entries!
 I like it 
  March 17, 2017
awesome job! How courageous to make a car 7 studs wide when 6 is the norm!
 I like it 
  March 16, 2017
Great job on this one! The shaping on the front is very accurate. Love how you did the grille and the tail lights in particular.
 I like it 
  March 14, 2017
wow, beautiful! It seems that SC scale has come to stay. Your EB110 is greatly transplanted to it, hats off!
 I like it 
  March 14, 2017
Awesome build! Love the shaping and color choice!
 I like it 
  March 14, 2017
Impressive job. Really good SC conversion.
 I like it 
  March 14, 2017
Wow! Very smooth looking, with an excellent profile. This is going to be one of the ones to beat!
 I made it 
  March 13, 2017
Quoting Emmanuel Spencer Very good creation!
Thanks, mate! ~Cheers
 I made it 
  March 13, 2017
Quoting El Barto ! Nice one! From the pre-VW days.
Thanks, Commander! ...from the better days!
 I made it 
  March 13, 2017
Quoting Jack Sparrow Hate Bugattis but love this model. Excellent detail and scale. :-)
Thanks! Me too. Since they are produced under the hand of VW they look like a Beetle on steroids. *shiver*
 I like it 
  March 13, 2017
Hate Bugattis but love this model. Excellent detail and scale. :-)
 I like it 
  March 13, 2017
Nice one! From the pre-VW days.
 I made it 
  March 13, 2017
Quoting Gallardo of LU yeah it was on my short list of cars, like I said I hadn't really started work on it, maybe after the contest is over i'll take a stab at it (I really don't like building the same as others during contests)
Hmm, yes, I can understand that.
  March 13, 2017
yeah it was on my short list of cars, like I said I hadn't really started work on it, maybe after the contest is over i'll take a stab at it (I really don't like building the same as others during contests)
 I like it 
  March 13, 2017
Very good creation!
 I made it 
  March 13, 2017
Quoting Sven ;o) Ist wirklich ein schönes Modell geworden. In six wide würde es lange nicht so gut aussehen, allein schon wegen der Scheinwerfer die ja doch ein sehr wichtiges Detail sind. Great work again Marc ;)
Danke! Ja, die Scheinwerfer und der vordere Lufteinlass schreien förmlich seven-wide. Ich finde auch, dass es den Autos sonst etwas an Breite fehlt. ~Cheers
 I made it 
  March 13, 2017
Quoting Elk Guard Great work! I agree with your scale choice, 7-wide suits the wheel arches much better!
Thanks, Elk! I agree with you. In 6-wide, they seem too big. ~Marc
 I like it 
  March 13, 2017
Ist wirklich ein schönes Modell geworden. In six wide würde es lange nicht so gut aussehen, allein schon wegen der Scheinwerfer die ja doch ein sehr wichtiges Detail sind. Great work again Marc ;)
 I like it 
  March 11, 2017
Great work! I agree with your scale choice, 7-wide suits the wheel arches much better!
 I made it 
  March 11, 2017
Quoting marcel urbanija Oh jesus christ that's absolutely amazing.
Glad to hear that you like it! ~Cheers
 I made it 
  March 11, 2017
Quoting The Evstar Very well done! 7 wide works very well for this car!
Thanks a lot!
 I made it 
  March 11, 2017
Quoting Nick Barrett The nicest representation of this most neglected of Bugattis that I've seen at this scale. 7-wide seems the way to go to me.
Yeah, it's the best scale to recreate the front, imo. Thanks, Nick!
 I made it 
  March 11, 2017
Quoting Per Bonde Very well done. Looks good from all angles.
Thanks, buddy! Nice to hear. ~Cheers
 I made it 
  March 11, 2017
Quoting Parrington Levens :) Something real fun about the speed king genre. Nice car again dude.
Yeah, the scale is just soo cool. Enough space for some decent details and small enough for not depleting your parts storage! Thanks!
 I made it 
  March 11, 2017
Quoting adam thelegofan rutland amazing!:D
Thanks, man!
 I made it 
  March 11, 2017
Quoting Clayton Marchetti Positively gorgeous Marc! The shaping is fantastic. I like the engine detail in the rear window. I love the Ferrari in the last pic!
Thank you, Captain! Yeah, nothing beats some sixties car goodness. Well, the eighties and nineties have their vibe, too. ~Marc
 I made it 
  March 11, 2017
Quoting Geoffrey Welch This looks amazing! You did a spectacular job and it is instantly recognizable.
Thanks, Geoffrey! That's exactly what I wanted to achieve. ~Cheers
 I made it 
  March 11, 2017
Quoting Gallardo of LU well i guess i need to pick a different car, good thing i hadn't started building haha! very well done here, this looks terrific in 7 wide, and i love all the little details hidden in there, the swap-able wing, exposed engine. even the headlights and grill are very well represented. i was surprised to see a sticker in the front corners it wasn't needed but it doesn't detract from it either.
Thanks, buddy! Yeah, I wasn't sure about the stickers, either. But, imo a solution for the brake cooling intakes was needed and all the brick built ones I tried looked like..., well not really good. So, you had planed to build this car, too? Would really like to see your take on it! ~Cheers
 I like it 
  March 11, 2017
Oh jesus christ that's absolutely amazing.
 I like it 
  March 11, 2017
Very well done! 7 wide works very well for this car!
 I like it 
  March 11, 2017
The nicest representation of this most neglected of Bugattis that I've seen at this scale. 7-wide seems the way to go to me.
 I like it 
  March 10, 2017
Very well done. Looks good from all angles.
 I like it 
  March 10, 2017
:) Something real fun about the speed king genre. Nice car again dude.
 I like it 
  March 10, 2017
amazing!:D
 I like it 
  March 10, 2017
Positively gorgeous Marc! The shaping is fantastic. I like the engine detail in the rear window. I love the Ferrari in the last pic!
 I like it 
  March 10, 2017
This looks amazing! You did a spectacular job and it is instantly recognizable.
 I like it 
  March 10, 2017
well i guess i need to pick a different car, good thing i hadn't started building haha! very well done here, this looks terrific in 7 wide, and i love all the little details hidden in there, the swap-able wing, exposed engine. even the headlights and grill are very well represented. i was surprised to see a sticker in the front corners it wasn't needed but it doesn't detract from it either.
 
By Marc "Edge" R.unde
Add to my favorite builders

40
people like this. See who.

1,039 visitors
52 comments
Added March 10, 2017
 


LEGO models my own creation MOCpages toys shop Bugatti EB110 GTVehicles


You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2017 Sean Kenney Design Inc | Privacy policy | Terms of use