MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop KS-66 "Sayonara"Bombers
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
KS-66 "Sayonara"
A Space MOC which blends effectively the properties of fighter and bomber spacecraft. I have both CAD renderings and an actual physical model of the spaceship.
About this creation
The LDR files (blueprints) are on my brickshelf gallery if anyone's interested.

Notes on the KS-66 "Sayonara" space fighter-Bomber:

The KS-66 was originally created as a glorified Y- wing with parts from the 7150 TIE fighter and Y-Wing set. It had S-foils, 2 engines (to the current 4), a rear turret, and a tactical (but not strategic) missile bay. It was probably what one would now call a "heavy fighter".

Later, I realized a need for a strategic bomber in my fleet. The KS-66 was the largest ship with a decent undercarriage at the time, so I added a strategic missile bay running the length of the fuselage, covered with a forward-opening door with pin hinges aft.

After adding pneumatics to the 8448, I was left with two perfectly good air damped shock absorbers that I decided to put to good use. They found their way into the KS-66 (now called the "Sayonara", because it is what one deploys upon things to which you would like to say "goodbye") in the form of extensible forward wings. The thrusters on the wings improve maneuverability, and the leading edge filaments are used to cut through things in close combat, ( i.e. against a Mech, presumably armed with a sword.) I know, it's not much comfort knowing all you've got is a couple of extensible swords against a mech, but it's better than nothing. These forward wings fold back for storage because the ship would not fit on my shelf with the wings in extended position.

My apologies to the lego CAD community for the sloppy job I did making the gatling guns betwixt the rear top engine struts. The program I use makes it difficult to see the rear of the ship head-on, so I kind of had to guess on where to put the chambers. This is my first CAD project, so bear with me. I did not unfold the S-foils
because it would have been way too difficult to get all the angles right.

Only recently have I cleaned up the color scheme (currently black to white and trimmed in blue). Right now it looks very Star Wars-esque, but if you eliminate some of the darks it could be a PCS fighter. Swap out the blues, and you could have an eastern blok fighter. It would probably be pretty easy to change the color scheme on the LDR file, but what you see here reflects the color scheme I have on the real thing right now.

Enlarge image
   The KS-66 in all its tangible glory

Enlarge image
   The fighterbomber from the side. Here, you can see the bottom engines

Enlarge image
   A view from aft. Notice the imposing defensive turret

Enlarge image
   The cockpit (closed), and pilot. Note the maneuvering jets and laser cannons on either side of the cockpit. The cockpit is quite small. I would have extended it downward, but I already put some highly explosive projectiles where the pilot's rear would go.

Enlarge image
   The cockpit (open), with the pilot climbing up a ladder into his ship. Shown with one laser cannon folded up. Both laser cannons can fold up for easy entry from either side.

Enlarge image
   The interior of the cockpit. It has a big navigation monitor, a smaller tactics monitor, a keyboard mounted on some pneumatic tubing (sorry about the glare), and a joystick (partially obscured by the keyboard).

Enlarge image
   The gunner's station. The camera on top of the gun cluster feeds into a monitor (white sloped brick just above and in front of the gunner's head). There is also a window behind the gunner so he can see what's behind him.

Enlarge image
   The astromech droid sits inside a small dorsal compartment.

Enlarge image
   With the front wings extended

Enlarge image
   Front wings extended and gatling guns folded forward

Enlarge image
   The business end of the Sayonara's six-chamber single barrel gatling gun struts. These weapons more than make up for in power what they lack in range.

Enlarge image
   All wings extended for maximum maneuverability in all directions.

Enlarge image
   I definitely would not like to be standing there.

Here, you can see the two tactical missiles in their bay under the cockpit.

Enlarge image
   All extended, tilted slightly forward, viewed from the side. This would be a good time to point out the blue "combo" turrets under the lower wings. They're decent for defensive purposes, but more often used for their maneuvering jets.

Enlarge image
   Engine configuration inspired by the X-wing.
Engines built from components from a Y-wing.

Enlarge image
   Underside. All the wings are folded in, all the weapons bays are closed. The transparent green engine cover domes are just about the only nuances to the otherwise flawless black, white, gray with blue trim exterior. This is my first *really* successful color scheme.

Enlarge image
   All bays open. The big ones are strategic, the little ones are tactical. Supposedly the different colored missiles do different things.
I call this payload a Six pack of Whoop-@#*. :)

Enlarge image
   The crew en route to their ship aboard the base transport buggy hauling a ladder platform. (the color scheme just happens to match that of the KS-66). ;)

Enlarge image
   The Sayonara, from top/port/bow. This is more or less what the tangible one looks like. The only differences are:
1:The real one has different colored engine domes (I only had 2 white ones).
2:one part on the gatling guns is different (because LDRAW didn't have it in its libraries). There is one #6536 that needs to be replaced with a #42003 in each pod. If you have an Ldraw part for #42003, let me know.
3: The gatling gun assemblies kinda suck in the CAD version. they're kinda sloppy in the CAD model because of the missing part and because I can't look at that part of the ship head-on.

Enlarge image
   Annotated with all the cool systems. :) The Sayonara sports
3 sets of maneuvering thrusters,
4 main engines,
2 light laser cannon turrets,
2 fixed medium laser cannons,
2 fixed short-range gatling guns (single barrel, six chamber),
1 rear turret which includes a pair of medium laser cannons and a pair of cryolasers (like medium lasers except they're kept nice and cold. longer range, longer pulse time, higher power, etc.),
2 extensible close combat foils,
a small bay that holds 2 small tactical missiles,
and a larger bay that holds up to 6 full hex-cone strategic missiles (a 6-pack of whoop-@#*. I can't say that on the 'net or they'll kick me off)

Enlarge image
   Just another CAD rendering, this time from the underside.

I hope you had fun viewing the KS-66 Sayonara. :)


 I like it 
  August 10, 2005
Incredible detail and coolness and stuff like that!!!
 I like it 
  January 27, 2005
My favorite of all of yours that I've seen. This is awesome, and the history is very nicely detailed. Lot's of pics too.
 I like it 
  December 31, 2004
I love the pic with all it's wings extended... looks like it's ready to go kung-fu on someone.
 I like it 
  December 22, 2004
Very nice. I like the amount of detail. You obviously put a lot of work into this!
 I like it 
  November 17, 2004
I don't care how much punishment my ship, Divine Wind, could dish out! It would still have trouble tangling with something like that. Cool ship!
 I like it 
  November 16, 2004
Sweetness. The folding wing desgin looks great. Keep up the good work.
 I like it 
  November 11, 2004
Very nice, looks like you spent quite some time on editing and the storyline. Great effort, keep those mocs comin'!
By Wes Coleman
Add to my favorite builders

people like this. See who.

5,494 visitors
Added October 19, 2004
 You are at the beginning of this folder. Memnonia
More from Wes
More across MOCpages

LEGO models my own creation MOCpages toys shop KS-66 "Sayonara"Bombers

You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2018 Sean Kenney Design Inc | Privacy policy | Terms of use