MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop Handgun instructionsBuilding instructions
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
Handgun instructions
I found out who made these instructions. They were made by Jacob Norad. I found them on his brick shelf. I A NOT RESPONISBLE FOR THE ACCIDENTS THAT MAY HAPPEN WITH THIS GUN. SO BE SMART AND I RECOMEND WEARING EYE PROTECTION WHEN USING AND MAKING.
About this creation

There are many ways of changing the trigger pieces if you don't have the thin ones.

Yay! congratulations your done! I hope you understand how the slide works.

This is the mazagine. I'm pretty sure you can figure out how to stick it in.

Return Back To Top


To:Rtas 'Vadum (from Sanghelios) November 7, 2008
Two things: 1. I recomend making this because I have and it's AWESOME. 2.I didn't make these instructions. I found them on someguys brickshelf when I was looking for something and so I posted them here.

To:Kyle Locke (from Canada, Ontario) November 8, 2008
From my experience I recomend you use a mega block, or a damaged lego peice. Due to the fact that the force of the ram might be strong enough to cut or dent your lego peice.

To:kyle Locke (from Canada, Ontario) November 8, 2008
Ok I have 2 things in mind because I do not understand what you mean when the "peice" doesn't move. My first idea is that your having trouble with the ram(the part that pushes the bullet out). My suggestion would be when your on step 25 replace the 4x2 brick with a 3x2 and take off the 6x2 plate and replace it with a 2x3 plate. When you have that covered pull the trigger and it should fire but you must hold the trigger to see how long it takes. If it takes longer then 2 second tighten the rubberband. If you didn't mean this then the other thing I had in mind was that the bullet get's stuck in the barrel. If it does this then simply replace your amunition with a 1x2 brick. I hope this helped.

Once again to:Kyle Locke (from Canada, Ontario) November 8, 2008
Well what do you think? Of course it it goes in front of the grey half bushings. Your not going to pull back just the slide are you? Those hooks on the slide pull the ram back by hooking on to those two half bushings.

To:Low Rida (from Cybertron) November 10, 2008
No it's single shot. But it's possible to MAKE it shoot semiauto if you spend sometime with it. Please also take note that I didn't make these instructions. I don't want to be called a theif.

To:brandon deeb November 29, 2008
Tell me what you messed up on and I'll try to guide you through it.


 I like it 
  October 15, 2012
Hello can you order a kit for this or is there a parts list so I can make this cool gun?
  August 20, 2012
i just finished making it and are thinking of making a side mag for the opening.
 I like it 
  September 12, 2011
I will have to destroy so many things to build this.
 I like it 
  August 19, 2011
I like it, but it needs a list of the bricks needed.
 I like it 
  April 3, 2011
@Kyle Flannery, no the slide isn't supposed to lock as you pull the trigger, it is supposed to snap back. If you want it to lock, there should be a slide lock in which you slide the slide, you slide the lock and voila! The slide is locked! :D -I didn't build it yet due to a school project using lego D: and am not sure about that slide lock thing
  November 24, 2010
i made it now and its a good system but is s*cks if you try to shoot :( srry for bad rating but i stil love your other guns ;P
  October 31, 2010
Is there a parts list?
 I like it 
  September 3, 2009
Budhan I made a firing mech. for the gun i will post it up as soon as i can
  August 29, 2009
Is the slide supposed to lock until you pull the trigger? When I pull it back, it just snaps forward again without the trigger.
  May 31, 2009
There is an error in "";, the grey cross pin is shown in the fifth hole from the left, when in fact it should be in the fourth hole. Putting it into the fifth turns your trigger into a lego breaker.
 I made it 
  May 24, 2009
Quoting Simron B these instructions are from a guy named Jacob Norad
I gave credit to him in the description. My whole reason for posting this is because he didn't post full instructions.
  May 24, 2009
these instructions are from a guy named Jacob Norad
Bogdanski Olegovich
 I like it 
Mats Tveraaen
  May 2, 2009
i think ill try to make this
 I like it 
  November 29, 2008
i messed up.
 I like it 
  November 10, 2008
this is brilliant! it doesn't shoot semi-auto right?
 I like it 
  November 8, 2008
Sorry but here is the last one. When you place the slide in on step 23, do you put it behind or infront of the 2 side peices on the ram (they are grey circles)?
 I like it 
  November 8, 2008
I have on more question. I have it all done but, when I go to shoot it (pulled the slide back) I pull the trigger the peice doesn't move. I have it correct in steps 6-9. Do you have an idea what is wrong?
 I like it 
  November 8, 2008
Nice job on this. I'm working on this right now. What would you recommend for the bullets?
By Bogdanski Olegovich
Add to my favorite builders

people like this. See who.

42,924 visitors
Added November 7, 2008

LEGO models my own creation MOCpages toys shop Handgun instructionsBuilding instructions

You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2018 Sean Kenney Design Inc | Privacy policy | Terms of use