MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
Comment on Door Technique
Rate it
55555 Excellent  
I like it
4444 Very good
I like it
333 Good
22 Average
1 Not good
  (I'll rate it later)
First name Have a MOCapges account? Sign in
Last name
You'll need to check your e-mail before we post your comment.
Your e-mail won't be shown onscreen, and we will never sell or abuse it.
(No HTML, please)
  Use appropriate language and do not be mean, rude, or insulting.
Inappropriate comments will be deleted before anyone sees them,
and your account may be deleted. Full rules | Why?

Door Technique . . So after I posted the Nemesis, I had a few requests to show the technique that I used for the doors. Here is the step-by-step for the technique. I took quick photos without really setting up any lighting or anything so the pics are not the highest quality. I apologize about that, but even with the blurriness, this should give you a good idea of how to make it work. Feel free to ask any questions in the comments section, Iíll answer them as best I can. This here is the basic setup for under the floor. This entire thing is not a prerequisite to make it work, just the area inside the red rectangle. It is important to note the gap inside the blue circle, though. That must be there. Youíll see why in a moment. Okay, start with these pieces: two 1x4 plates, one 1x2 plate, one 1x1 plate, and a 1x1 plate with clip. Put those pieces together to look like this. Add it to your floor where you see the red rectangle. For door and the inner workings of the locking mechanism, youíll need these pieces: two 1x6 tiles, (totally for aesthetics, not a necessity to the build), two technic Ĺ pins, one 2x4 plate, three 1x2 bricks, two 1x3 bricks, two 2x3 plates, four 1x1 technic bricks, two technic liftarms with five holes, two long technic pins, and one 6-stud-long bar. The red rectangles are around the bricks that are going to go together in the coming steps. Put the long pins into the liftarms. Add a 1x1 technic brick on each end of the pin. The Ĺ pins go in the other end of the liftarms. Put the bricks together like this. The set in the middle goes on top of the 2x4 plate. Put the bar through the Ĺ pins like this. The red circle is to show you the short length of bar that has to be left protruding out of the end of the liftarm. Add the liftarm portion to the brick portion like this. Add the two 1x6 tiles to the front like this. This is just for aesthetics. If you want to block the gaps, this is an effective way to do it. Add the rest of the door. With the plates on the bottom of the door and the top of the door added, it will stabilize the lower part of the door. Add the door to the floor section like this. Add the floor. Now itís all held together and there is just enough length left in the liftarm to extend out and allow the door to lay down. Thanks for checking out this technique. Let me know if you found it helpful.

LEGO models my own creation MOCpages toys shop

You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2018 Sean Kenney Design Inc | Privacy policy | Terms of use